Develop Ineo 164 Installer
. Applied Machine: © DEVELOP GmbH I. Outline of Installation Procedures for II. Installation Space (unit: mm (inch)) ineo 164 ineo 164 + MB-503 928 (36-1/2) Follow the notes below to install the printer and the 783 (30-13/16) multi bypass tray. Accessory Parts VI. Removing Protective Tape, Packaging Materials and Imaging Unit Name Q’ty 1. Remove pieces of protective tape and packaging 1.
User’s Guide 1 set materials. Installation Manual (this manual) 3. Power Cord 5.
Aug 30, 2010 - The bizhub 164 can stand alone as a copier. USB connection supports Both 1.1 and 2.0. It also comes with a driver disk for plug and play easy. Develop (sebagai produsen printer yang mendukung software ini dan informasi yang terkait ) dan kami (Sandi Aksara Perkasa) selalu. PC - Fax Driver.
Power Cord Instruction. 6. Unscrew the screws shown in the illustration to 9. Slide out the drawer and remove the protective remove the imaging unit (two screws). Tape and cushioning material.
Note:. Do not touch or scratch the PC drum. Starter. Cover the imaging unit, which has been removed, with a protective cloth or similar mate- rial.
Loading the Starter 3. Remove the developing unit cover (three screws). While pressing the connector tabs, push out the connector from the imaging unit. A11UIXC014MA Tabs A0XXIXC040MA 4. Ready a packet of the starter and cut off one cor- ner of the aluminum packet with scissors. Install the front of the PC drum unit first, and then 10.
Plug the connector, and then attach the cover the rear part. Then, secure the screws (five (one screw). Note:. Do not open the lower part wide, otherwise the charger may drop. Installing the Toner Bottle Note: A toner bottle is not shipped with your printer.
Develop Ineo 164
Purchase one that is separately available. Shake the toner bottle well about five times in the vertical direction. Then, turn it over and repeat the same procedure.